% -0,09
    % 0,03
  • € EURO
    % -0,16
  • £ POUND
    % -0,08
  • ¥ YUAN
    % 0,09
    % 1,50
    % -1,18
  • BIST 100
    % -0,27

Samsung Dishwasher Heavy Light Blinking (2023)

Samsung Dishwasher Heavy Light Blinking (2023)

In today’s article, we shared our detailed Investments article about Samsung Dishwasher Heavy Light Blinking (2023). You can also find answers to Samsung Dishwasher Heavy Light Blinking (2023) in our Post Today.

If you notice that the heavy light blinking on samsung dishwasher, it means that there is too much water in the machine and the drain system isn’t working properly. It’s also possible that the machine has a clogged hose or filter. To fix this issue, follow these steps: First, turn off the power supply and water supply, then turn on the machine. The “HEAVY” light will flash, and you’ll need to troubleshoot the problem.

If the heavy auto light is blinking while the dishwasher is running, it means that the temperature sensor isn’t functioning correctly. To fix this problem, drain the water and add more detergent. Next, turn off the power to the unit at the circuit breaker. In some cases, the dishwasher may be overfilled with water, or the water valve has become frozen or clogged. If these steps don’t fix the problem, you can visit a Samsung Service Center for further help.

If the Heavy, Delicate, or Quick light blinks simultaneously, it means that the temperature sensor is not working correctly. If you see these lights on your Samsung dishwasher, check if there’s enough water in the machine. If not, you can try to add more detergent and run the machine on the normal cycle. If none of those things resolve the problem, you can contact the Samsung Support Center for help.


Your Samsung dishwasher may be flashing heavy and not draining water. You should look into the cause for the problem by visiting Samsung’s Support website. The problem is most likely caused by a leak that is detected by the leak sensor. This means there is too much water in the dishwasher and the drainage pump is unable to work properly. You should also check the water temperature and pressure, as these are common causes for the heavy light to be on.

Your Samsung dishwasher may be showing an over-water error or the “Normal, SMART AUTO, and Heavy” lights are flashing. These errors indicate a problem with the case sensor, which is located inside the machine. You can diagnose and fix the problem by checking the manual, which includes the manufacturer’s parts. However, you should only do this if you are not able to locate the problem yourself.

Another reason your Samsung dishwasher is flashing heavy is because it is over-watering. This error is meant to alert you to the over-watering limit, and may be caused by a faulty sensor. It is best to check the case sensor and check the water supply valve first. If you still cannot fix the problem, you may have to contact a Samsung Support Center. A combination of over-water and heavy blinking lights indicates that your dishwasher has a problem with the sensor, and you should seek assistance from a service technician.


If you notice that the samsung dishwasher heavy light blinking doesn’t go off after you’ve run the test cycle, you might have to reset it manually. To do this, simply disconnect the power and then push the LC code button on the machine’s panel. If the LC code doesn’t disappear after the cycle, you can also call the company’s customer service. The representative will need the model number of your machine, and a brief description of the problem.

The light may be indicating water pressure or temperature problems. If it has four lights blinking together, there may be a problem with the control panel. The best way to reset the lights is to repair the malfunction and try running a normal cycle again. Once this has been done, your Samsung dishwasher should run as normal again. If it continues to blink, contact the manufacturer’s customer service.

If the flashing light on your Samsung dishwasher is indicating that the drain hose has become stuck, it’s most likely a drainage problem. First, make sure that you have a good connection to the sink and that the hose isn’t kinked. If these steps don’t work, try a reset on the dishwasher. If the light doesn’t go away, you can also try contacting Samsung’s customer support center or calling a repairman.


If you have a blinking dishwasher light, you might be having trouble with one of the appliances. Most dishwashers have a light that blinks to let you know what the problem is. If you want to fix this issue, you can try to run a diagnostic cycle. This will help you determine what the problem is and how to fix it. You can also check the model number to find out if it has a similar problem.

Before you try this, make sure you wear gloves and protective clothing. First of all, disabling your dishwasher for two minutes can reset the electronic components. Once this is done, you should be able to use it normally again. If that doesn’t work, try some of the other general troubleshooting suggestions below. You should also check the door switch to see if it is closed properly.

If the samsung dishwasher heavy light blinking because of an error, turn it off by turning off the power and unplugging the unit. This will allow the dishwasher to restart without any further problems. If the flashing dishwasher light is not turning off due to any of these problems, you can try to reset it by removing the power cord and resetting the appliance. It will automatically restart when the water temperature reaches the minimum level.

Araç çubuğuna atla